SK-LOG Lite Edition Software Download

SK-LOG　Lite版
Use
You can connect to multiple measuring instruments and import the measured data into Excel.
-Features
  • List display and tolerance display are possible with multiple connections.
  • The cell designated output to EXCEL is possible.
  • Automatic version upgrade function.
  • Voice reading function of measured values.
  • Visually easy to use with command buttons.
  • Able to connect with various measuring instruments.
-Target model
  • Vernier calipers
    • S-LINE Digital vernier calipers(MW series)
    • S-LINE Digital vernier calipers(S series)
    • Digital caliper(GDC series)
    • S-LINE Height gauge
  • Micrometer
    • Electronic digital S-LINE micrometer(MW series)
    • Electronic digital S-LINE micrometer(S series)
    • Electronic digital S-LINE three-point internal micrometer
  • Indicators
    • Digital S-LINE indicators(MW series)
    • Digital S-LINE indicators(MH series)
    • Digital S-LINE indicators(DEI-233 series)
    • Digital S-LINE indicators(DEI-WKS series)
    • Digital S-LINE test indicators(DEI-234 series)
    • Digital S-LINE test indicators(DET-SW series)
  • Levelnic
    • DL-SXY series
    • DL-S4W
    • DL-S3
    • DL-S2W
    • DL-m series
    • DL-D5
    • DL-ｍXY
  • Digital Protractor
    • DP-180
    • DP-30XY
    • DP-10XY
    • BB-180W
  • Mitutoyo
    • Digital caliper
    • Digital Micrometer
    • Digimatic Indicator
-Edition
  • Lite version
  • Standard version (Web authentication version, USB dongle version)
  • Note:The Lite version is limited to one connected device and the cell specification output function of EXCEL is disabled.
The latest version of the driver software of the S line for data transfer software “SLOG” can be downloaded from the following.

License Agreement

Software provided in the “Niigata Seiki Home Page” can be downloaded only when the purpose of use on the following conditions.

Use conditions

– It is used for the target model of software.
– Do not use the software to business practices.(It is not sold to rental act and third parties)
– It has the operating environment described in the software introduction
– It does not matter that responsibility to Niigata Seiki for any damages caused by this software.
– Modifying the software, or not reverse engineering.

Guarantee range of software

– Download the introduction of the software will be done under the responsibility of the customer.
– Software may be used to improve or change without notice.
– If there are third-party programs in the software, separately, but will be made use license of the program for customers than other companies, as long as it does not conflict with the contents of the license agreement, the customer shall be subject to the terms and conditions of this Agreement describedYou have.

Copyright owner

Copyright of distribution software are the property of their Niigata Seiki Co., Ltd., except for those of particular described.
On the License Agreement of the check, please download.

Get latest versions

Software name Edition Supported OS Version Last updated File capacity Download
SKLOG Lite Windows7/8/8.1/10/11 1.8.3.0 2025.01.24 About 77.0MB Download
Due to the discontinuation of TLS1.0, updates are no longer available if you are using versions prior to 1.7.1.1.
Please download the latest version from this site.

Get USB Driver

Software name Edition Supported OS Version Last updated File capacity Download
FTDI USB Driver DTC Wired Cable Products Windows7/8/8.1/10/11 2.12.28 2017.08.24 About 3.87MB Download
ANT Driver MW series products Windows7/8/8.1/10/11 1.2.4.0 2011.04.12 About 952KB Download
DP-180 Driver Levelnic DP-180 Windows10/11 11.1.0.53 2022.02.18 About 7.12MB Download
Windows7/8 6.7.6.2130 2018.05.23

Get Library

Driver name Applicable Supported OS Last updated File capacity Download
Microsoft Visual C++ Redistributable BB-180W,DET-SW etc BLE device Windows10/11 VC2015,2017,2019,2022 About 13.0MB Download

Driver instruction manual

Applicable Document type Version Last updated File capacity Download
Levelnic DP-180 Driver installation manual 2205 2022.05.25 About 130KB Download

Get previous versions

Software name Edition Supported OS Version Last updated File capacity Download
SKLOG Lite Windows7/8/8.1/10/11 1.8.2.0 2024.10.21 About 74.6MB Download
SKLOG Lite Windows7/8/8.1/10/11 1.8.1.0 2024.10.01 About 68.2MB Download
SKLOG Lite Windows7/8/8.1/10/11 1.8.0.0 2024.07.12 About 68.2MB Download
SKLOG Lite Windows7/8/8.1/10/11 1.7.2.0 2024.04.02 About 68.2MB Download
SKLOG Lite Windows7/8/8.1/10/11 1.6.3.0 2023.04.28 About 32.8MB Download
SKLOG Lite Windows7/8/8.1/10/11 1.5.2.1 2022.09.30 About 32.8MB Download
SKLOG Lite Windows7/8/8.1/10/11 1.4.1.0 2022.04.08 About 29.4MB Download
SKLOG Lite Windows7/8/8.1/10/11 1.3.1.0 2022.03.04 About 28.7MB Download
SKLOG Lite Windows7/8/8.1/10/11 1.2.3.0 2022.01.24 About 18.8MB Download
SKLOG Lite Windows7/8/8.1/10/11 1.1.13.1 2021.11.22 About 18.8MB Download
Change log
Ver1.8.3.0[2025.01.24]
  1. Levelnic DP-**XY* series equipment additionally supported
  2. Levelnic DL-mini equipment additionally supported
Past Update Information
Ver1.8.2.0[2024.10.21]
  1. 1. Renaming from “Other Recording” to “Keyboard Recording.”
  2. Added “Output Destination” to the keyboard output settings. The usage instructions are as follows:
    In “Output Destination,” you can choose either “Direct” or “Specified Application.”
    If “Direct” is selected, it is unnecessary to select an application name, and input can be sent to any application.
    For recording methods, refer to the change log for version 1.8.1.0 from the past updates.
    If “Specified Application” is selected, press the application selection button to register the desired application, enabling input to the registered application.
    *This action is the same as the “Other Recording” function in previous versions.
●Ver1.8.1.0[2024.10.01]
  1. Additional equipment supports for Digital S-line Mini Indicator DMI-1095SW
  2. Bug Fix for other recording.
    In the previous update, we enabled input to any application without requiring application selection. However, a bug was identified where input could not be processed in certain applications. To address compatibility with field report software and similar applications, the following fixes were implemented:
    Recording Method: When using the record button setting, input is directed to the window immediately below the SK-LOG window.
    Recording Method: For automatic output intervals or when setting up a measuring device, input is directed to the frontmost window.
  3. Added excel checkbox in other output settings
    It was found that when outputting to Excel via other recording, some measuring devices could not input values directly.
    By checking this box, a ‘ (single quote) is added before the measurement value, allowing it to be recognized as a string and enabling input.
    *Usually, it is unnecessary to check this box.
  4. Additional equipment supports for Digital Precision Indicator Display Unit DPI-DRC.
    It is now possible to use the DPI-DRC in combination with the Digital Precision Indicators (DPI-1001SC and DPI-1001LC).
    By changing the initial parameter P06 RS Output Mode to Sd-2 (Internal Timer), and restoring the other settings to their factory defaults, the device can be used. The detailed settings are as follows:
    P06 (RS Output Mode): Sd-2 (Internal Timer)
    P30 (Communication Baud Rate): 9600
    P31 (Data Length): d-8 (8 Bits)
    P32 (Stop Bit): S-1 (1 Bit)
    P33 (Parity Bit): Pn (No Parity)
    P34 (Delimiter): CrLF
    P35 (XON/XOFF): OFF (Disabled)
●Ver1.8.0.0[2024.07.12]
  1. Enabled input into merged cells during other recording.
  2. During other recording, enable to input measurement values and dates into different cells.
    When the input direction is ENTER, DOWN, or UP, measurement values and dates are entered into separate cells horizontally. When the input direction is TAB, RIGHT, or LEFT, measurement values and dates are entered into separate cells vertically.
  3. During other recording, enable input into any application selected before recording, even without selecting the application name in the settings screen.
  4. Fixed the issue where the beep sound would not play during continuous accuracy NG.
  5. Fixed the issue where the text color of measurement values would not change in list display mode.
●Ver1.7.2.0[2024.04.02]
  1. Addition of Time Reset Button The case you want to record using multiple measuring devices at the same time with the automatic output settings, press the time reset button after connecting all the devices. This allows the same-timing automatic recording with multiple measuring devices.
  2. Additional support for DP-180 ABS display yellow device.
    The ABS display for DP-180 has red and yellow, the communication specifications vary depending on the display color.
    Please check the ABS display color of the DP-180 and select the appropriate device.
  3. Increased memory limit from 2GB to 3GB (LAA: (Large Address Aware) is supported.)
  4. Fixed the issue that prevented disconnection.
●Ver1.7.1.1[2023.12.15]
  1. Fixed issue preventing SK-LOG Updates.(Enabled for 1.7.1.1 ver and later automatic update.)
    *Due to the discontinuation of TLS 1.0, updates are no longer available using versions before 1.7.1.1.
    Please download the latest version from this website.
●Ver1.7.1.0[2023.11.30]
  1. Fixed the issue where commands could not be sent without opening the settings screen.
  2. Fixed the issue where incorrect cell positions occurred when resuming recording.
  3. Fixed the issue where changing reference values in the main screen accuracy settings was not applied.
  4. Fixed the issue where connection stability for MW series products.
  5. Additional support for Digital S-Line Multi-Height MHG-60M.
  6. Updated the Chinese user manual. (Changed to display the Chinese manual instead of the English manual when Chinese is selected.)
●Ver1.7.0.0[2023.10.30]
  1. Chinese language added.
●Ver1.6.3.0[2023.04.28]
  1. Fixed the issue with saving batch recording settings after restarting the application.
    EXCEL and CSV recordings were saved before, and now other recordings are also saved.
  2. Fixed the issue of incorrect measurement values inputted during batch recording.
    Added and extended the key input response time and measurement value output preparation time.
  3. Fixed that the correct generation date and time are inputted in the file name that was created during batch recording with CSV recording settings.
●Ver1.6.2.0[2023.03.27]
  1. Enabled batch recording for other recordings.
    In addition to EXCEL and CSV recordings, batch recording is now available for other recordings.
  2. Fixed the issue where proxy authentication failed if the proxy settings included ＠ and other characters.
●Ver1.6.1.0[2023.01.27]
  1. Fixed the issue where excessive disconnections occurred when real-time communication was turned off for ANT communication devices.
●Ver1.6.0.5[2022.12.28]
  1. Added a feature for setting multiple cell ranges and multiple accuracy.
    *This feature can be used by selecting multiple ranges in EXCEL with the Ctrl key when retrieving cell ranges.
  2. Fixed the issue where holding down a shortcut key resulted in multiple recordings.
  3. Accelerated the real-time communication interval for ANT-compatible devices from 1 second to 0.2 seconds.
    *Due to the characteristics of ANT communication, real-time communication may generate interruptions approximately once every several tens of seconds.
  4. Implemented automatic disconnection and reconnection processing for interruptions in ANT communication.
●Ver1.5.2.1[2022.09.30]
  1. Displayed the number of records in CSV recording, and the current number of created files when the file creation button is pressed.
    (Not compatible with 2-axis measuring devices. Also, not supported when single measuring device recording and batch recording are used simultaneously.)
  2. Enabled record deletion using the delete command or the ALL delete button in CSV recording.
    (The eraser command, previously supported only for EXCEL, can now be used to delete records in CSV as well.)
  3. Saved settings for screen maximization/standard view, list/single screen, and the selection of EXCEL/CSV for batch recording.
    (The previous state will be remembered the next time SK-LOG is launched.)
  4. Implemented automatic adjustment of the connection list height based on the number of set-up measuring devices.
    Scrolling is no longer required when multiple measuring devices are in a single category.
  5. Added a dialog display for connection errors caused by BLE settings being turned off on the computer.
●Ver1.5.1.0[2022.09.05]
  1. Added a command to change the file name during CSV recording.
  2. Fixed connection success rate and stability when connecting BLE devices.
  3. Modified the dialog for requesting redistributable libraries to provide direct access to the support page.
●Ver1.5.0.1[2022.07.22]
  1. Compatible For Windows 11 (Requires installation of the VC++ redistributable library).
  2. Enabled time recording when real-time mode is turned off.
  3. Fixed to disable monitoring of the measuring device status when the recording interval is less than one second to prevent communication congestion.
  4. Fixed the default measurement interval for CSV recording to match the values of each measuring device.
  5. Fixed the issue of incorrect recording ranges during reverse direction recording in Excel.
●Ver1.4.1.0[2022.04.08]
  1. Added the Digital S-Line Test Indicator DET-SW series.
    →Recording for the Digital S-Line Test Indicator DET-SW series is supported.
  2. Measuring devices can be switched using shortcut keys.
    →Switching measuring devices on the measurement display screen became easier using key combinations like Ctrl+1, Ctrl+2, and other Ctrl and number key combinations.
●Ver1.4.0.0[2022.03.31]
  1. Sheet switch notification during multi-sheet recording.
    →Sheet switching is easier to understand.
  2. Adjustable list display.
    →Measurement values in the list are now easier to view, and button operations are more user-friendly.
  3. CSV file name change.
    →The file name is set to the timestamp of the last recorded, ensuring prevention of data tampering.
  4. Fixed a bug where the record button needed to be pressed twice to record when using the DTC-M1 cable.
  5. Fixed to display the measuring device number when a settings error in Com or BLE.
  6. A dialog display for when BLE services are not available.
●Ver1.3.1.0[2022.03.04]
  1. Created a proxy settings form. (Added username and password setting function)
    →Be able to select three methods: No proxy, automatic retrieval, and user-specified settings.
●Ver1.3.0.0[2022.02.15]
  1. Added a command to initialize the write cell position of the measuring device.
  2. Added a command to delete all measurement values in a specific cell range of a measuring device.
  3. Added to display a warning dialog when the COM number and BLE device number are not set.
  4. Display of connection help screen. (ANT and BLE devices only)
  5. Fixed DP-30XY Range-Over judgment to take into the Offset value consideration.
  6. Fixed the problem that Excel maximization is canceled when recording with a measuring device button in other recordings.
  7. Fixed a bug where the DET-234 measurement direction change command did not work after the second time.
●Ver1.2.3.0[2022.01.24]
  1. Added compatible model Levelnic DL-SXYW-S.
  2. Added compatible model Levelnic DL-mXY.
  3. Added compatible model Levelnic DL-m4,5.
  4. BluetoothBOX DG02 of the main unit can be switched to real-time mode.
  5. Fixed to save CSV files as one file when batch-recording.
  6. Fixed a bug where only one measuring device could be overwritten when multiple measuring devices were recorded in Excel and the completion dialog was canceled.
●Ver1.2.1.0[2021.12.28]
  1. Improved Excel recording to allow recording settings across multiple sheets.
    →Be able to record data at one time in the same cell range for the sheets from Sheet 1 to Sheet 3.
  2. Improved that the recording completion dialog is displayed only when all connected measuring recording devices are completed.
    →The information that was displayed for each measuring device will be displayed at one time when all recordings have been completed.
  3. Improved that the recording can be done by the record button when the real-time setting is OFF.
    →The real-time function can cause momentary interruptions and drain the battery quickly, so it becomes possible to request and record measurement values ​​only when a button is pressed.
  4. For measuring devices that perform ANT communication, the connection icon will change to green when the connection is completed after pressing the connect button.
    →Before, even if you pressed the connect button, it would not be actually connected, but it’s easier to see whether you’re connected or not after improvement.The ANT communication device can only be connected when the wireless icon is flashing quickly. When it is flashing slowly at 1-second intervals, press the data or send button on the one-time measuring device.
  5. Changed to hide measuring devices that cannot use real-time functions.
  6. Fixed the issue of lost connections during recording with the Bluetooth BOX DL01’s record button.
  7. Fixed a bug where the proxy processing for license authentication was incorrect.
  8. Fixed the problem where a dialog about failed settings would appear even when a proxy was not used.
  9. Fixed a bug where sending a command would turn the real-time function ON even if it was OFF.
  10. Fixed a bug where the resolution which was set on the measurement device screen was not reflected.
  11. Changed the name of the measuring device on the display which was difficult to consider and long to more simple.
●Ver1.2.0.1[2021.12.07]
  1. Compatible for proxy connection. (version acquisition and license authentication are possible via proxy)
  2. Fixed a bug that could cause it to be determined as EXCEL was not installed even though it was already installed.
●Ver1.2.0.0[2021.11.22]
  1. The export button in the settings file adds the creation date and time to the settings file name, making it easy to back up settings files.
  2. In the MW series, the default value of ANT Dev No is automatically set based on the measuring device No. (the number is added to each line).
  3. Fixed to be the product selection display will open at startup if no measurement devices are registered.
  4. Fixed to allow real-time functions to be set for each measuring device.
  5. Fixed to register a product by simply clicking on the product selection screen.
  6. Fixed to prevent multiple Excel’s launching when selecting a cell range on Excel.
  7. Fixed a bug where data was sent once after connecting with Bluetooth BOX DTW-DG02.
  8. Fixed a bug that caused the system to freeze when using the Excel function on a No-Excel-installed computer.
●Ver1.1.13.1[2021.11.04]
  1. Fixed an issue where setting files from older versions could not be loaded.
●Ver1.1.13.0[2021.10.28]
  1. Added compatibility for Digital S-Line Height Gauge (M Series).
  2. Added a setting option for sound and vibration notification when recording completion.
  3. Enabled real-time communication via wired connection for Digital S-Line Caliper・Micro.
  4. Fixed a bug where the number of selectable resolutions was incorrect on Digital S-Line Indicators (MH, MW series).
  5. Fixed an issue where internet access was sometimes unavailable when version checks or using demo functions on Win10PC. (Updated SSL library)
●Ver1.1.12.1[2021.10.15]
  1. Added compatibility for DTW-DG02 (Bluetooth BOX for Windows 10).
  2. Fixed a bug where communication would fail after deleting or adding measuring devices with different communication types.
  3. Fixed a bug where the measuring device number and the actual connected device number became inconsistent when multiple BB-180W devices were connected.
●Ver1.1.11.2[2021.09.06]
  1. Fixed an issue that occurred in 1.1.11.1 that measuring devices could not be deleted.
  2. Fixed the visibility and identification of the real-time button.
●Ver1.1.11.1[2021.09.03]
  1. Modified to allow shortcut keys to be allocated to the batch recording button.
  2. Fixed the display position issue when editing shortcut keys.
  3. Fixed the issue where the display balance was incorrect on high-DPI computers.
  4. Fixed the labeling in the user registration function.
  5. Fixed a minor bug in the cell position memory function.
●Ver1.1.10.0[2021.08.17]
  1. Fixed an issue where a “?” icon was displayed, preventing connection in the MW series.
●Ver1.1.9.0[2021.07.27]
  1. Added a function for resuming recording from the previous cell position even after the application is closed.
●Ver1.1.7.0[2021.06.09]
  1. Fixed an issue where disconnections could occur during continuous recording with the Levelnic Bluetooth BOX.
  2. Fixed a bug where receiving the same measurement value twice in a row was not recognized as it was measured.
  3. In other recordings, the active window keeps as the recording application after recording, making cursor navigation easier.
●Ver1.1.6.0[2021.05.20]
  1. Fixed a bug where receiving a measurement value could stop during CSV recording.
  2. Improved internal processes related to the timer.
●Ver1.1.5.0[2021.04.13]
  1. Added for resizing the settings screen.
  2. Fixed an issue where timeout handling and button operation recording issues for Levelnic-related products.
  3. Improved to allow the Lite version to launch even when the web license is not authenticated.
Add to upper points, including usability improvements, some specifications, and display changes, are also included.
●Ver1.1.4.0[2021.03.22]
  1. Added compatibility for Levelnic DL-SXY.
  2. Added timeout handling for Levelnic-related products.
  3. Supported wireless and wired connections for Digital S-Line Indicators (MW Series, MH Series).
Add to upper points, including usability improvements, some specifications, and display changes, are also included.
●Ver1.1.3.0[2021.02.01]
  1. Improved reconnection processing for BLE devices.
  2. A dialog displays when the export is completed.
  3. Fixed a bug in changing the resolution display settings.
  4. Fixed a bug in the accuracy bar display during list view.
  5. Fixed the layout display issues on high-DPI displays.
Add to upper points, including usability improvements, some specifications, and display changes, are also included.
●Ver1.1.2.0[2021.01.05]
  1. Added support for Bevel Box BB-180W.
  2. Added support for Digital Angle Meter Levelnic DP-10XY.
  3. Fixed the default value for resolution settings.
  4. Fixed a bug where the accuracy setting command was sent unintentionally.
Add to upper points, including usability improvements, some specifications, and display changes, are also included.